CCJ did an article regarding cleaning Gas Turbine Cleaning UScleanblast.com was featured in this article : During hot-gas-path and major inspections, the upper half of the turbine casing is removed to access, inspect, and remove (as needed) any blades (buckets).
Removing laminate coating and glue with dry ice blasting is the best way to remove these containment. Buildup from glue and lint are common problems within the textile industry. We cleaned up this buildup without disassembly or damage to the
Ice Blasting has benefited the power industry with millions in savings verses replacement of valuable equipment. Over the years debris, dust and dirt tend to get build up on the windings, lamination and vent ducts. This results in blocking the
BEFORE Media Blasting UScleanblast.com was hired to restore this brick façade in a historic commercial property in Paterson NJ. This property was originally built as a silk factory but was vacant for many years. A Fortune 500 company purchased the
In a recent project US Cleanblast / Advanced Indoor Air Quality Care, performed and presenting a case study on dry ice blasting fuel tanks. This particular study was at a Power Plant in New York. Fuel tanks are located at
Dry Ice Blasting is the process where rice-sized dry ice pellets are propelled at high speeds blasting the substrate that is being cleaned. Upon contact with the substrate the pellets sublimate, transforming directly from a solid to a gas. It works upon kinetics.
Electrical substations house the principal equipment and machinery necessary for high-voltage, high-current power distribution from a power plant to commercial or residential usage. Virtually nothing, from charging a cell phone to running an airport, would be possible or practical without the use
Escalators are one of the most popular transit machines within shopping malls, airports, arenas, train stations and many more large complexes that require the quick movement of masses of people. By nature, as hundreds or thousands of people use these machines,
Dry Ice Blasting a stator, electric generator, motor, or induction motor can remove carbon deposits and debris from the windings as well as other contaminates from the air vents on both the stator and the rotor. Oil, paint chippings and
CO2: The versatile non-hazardous cleaner Posted on October 2, 2016 by Team CCJ Dry ice in pellet form is used extensively to remove rust, sulfur deposits, ammonia salts, and insulation debris from HRSG heat-transfer surfaces (finned tubes). It’s been used